Legacy HDS Forums

export tools to retrieve performance for dynamic pool logical dev

Discussion created by Legacy HDS Forums on Oct 25, 2012
Latest reply on Oct 26, 2012 by Legacy HDS Forums

Originally posted by: spupuz



i need to export performance data for a logical dev that is builded on top of a dynamic pool.
i did it before for Physical Group builded logical device, now i'm not able to understand how to do it for Logical Dev builded on a Dynamic Pool, can someone helpme please?

i used export tool.

java -classpath "./lib_70-03-01-00/JSanExport.jar;./lib_70-03-01-00/JSanRmiApiEx.jar;./lib_70-03-01-00/JSanRmiServerUx.jar" -Xmx536870912 -Dmd.command=".\command\command_test.txt" -Dmd.logpath=".\log\log_test" sanproject.getmondat.RJMdMain


Export tool start [Version 70-03-01/00]
md.command = .\command\command_test.txt
md.logpath = .\log\log_test
md.logfile = null
md.rmitimeout = null
md.divideshort = null
md.dividelong = null
command file = .\command\command_test.txt
[ 1] svpip xx.xxx.xxx.xxx
ipAddress = xxx.xxx.xx.xxx
[ 2] login User = [xxx], Passwd = [****************]
. HostPath = //xxxx-xxx.xxx.xxx.xxxx/RMIControl
. [login] lookup1:start
. lookup1 Normal
. [login] checkLicenseEx:start
. checkLicenseEx OK!!
. [login] lookup2:start
. lookup2 Normal
. [login] setUserTimeoutValue:start
. setUserTimeoutValue Normal
[SVP Version] 70-03-38/00
[ExportTool version] 70-03-01/00
. [login] useMonitor:start
. useMonitor Normal
. getSubsystemInfo start
. getSubsystemInfo end
. getProductName start
. getProductName end
. getMonitorInfo start [sanproject.serverux.arg.monitor.ArgMonitoringInfo@eaab5]
. getMonitorInfo end
[ 3] show
Monitoring time range
Short Range From : 2012/10/11 16:46 - To : 2012/10/24 10:31 Interval : 15min.
Long Range From : 2012/10/11 16:15 - To : 2012/10/24 10:15 Interval : 15min.
[ 4] help

Command Line Syntax

svpip {ip-address|host-name}
ip-address: The IP address of the SVP
host-name: The host name of the SVP

retry [time=m] [count=n]
time=m: m specifies the retry interval (1 to 59 minutes).
If this operand is omitted, 2 minutes is assumed.
count=n: n specifies the number of retry operations.
If n is 0, retry operations can be repeated endlessly.
If this operand is omitted, 3 is assumed.

login userid password
userid: The user ID to be used for logging into the SVP
password: The password of the user

show
Outputs the range of monitoring data stored in the SVP.

group {PhyPG [Short | Long] [[parity-group-id]:[parity-group-id]][ ...] |
PhyLDEV [Short | Long] [[parity-group-id]:[parity-group-id]][ ...] |
PhyExG [[external-group-id]:[external-group-id]][ ...] |
PhyExLDEV [[external-group-id]:[external-group-id]][ ...] |
PhyProc [Short | Long] |
PhyESW [Short | Long] |
PhyMPPK |
PG [[parity-group-id/virtual-device-id/external-group-id/m-vol-group-id]:[parity-group-id/virtual-device-id/external-group-id/m-vol-group-id]][ ...] |
LDEV [[[parity-group-id/virtual-device-id/external-group-id/m-vol-group-id]:[parity-group-id/virtual-device-id/external-group-id/m-vol-group-id]][ ...] | internal | virtual] |
LDEVEachOfCU [[[LDKC-CU-id]:[LDKC-CU-id]][ ...] | internal | virtual] |
Port [[port-name]:[port-name]][ ...] |
PortWWN [[port-name]:[port-name]][ ...] |
LU [[port-name.host-group-id]:[port-name.host-group-id]] [ ...] |
PPCGWWN [[ppc-group-name]:[ppc-group-name]][ ...] |
RemoteCopy |
RCLU [[port-name.host-group-id]:[port-name.host-group-id]] [ ...] |
RCLDEV [[LDKC-CU-id]:[LDKC-CU-id]][ ...] |
UniversalReplicator |
URJNL [[JNL-group-id]:[JNL-group-id]][ ...] |
URLU [[port-name.host-group-id]:[port-name.host-group-id]] [ ...] |
URLDEV [[LDKC-CU-id]:[LDKC-CU-id]][ ...] }

PhyPG: Specifies that the tool should export statistics about parity
groups.
PhyLDEV: Specifies that the tool should export statistics about LDEVs.
PhyExG: Specifies that the tool should export statistics about external groups.
PhyExLDEV:Specifies that the tool should export statistics about LDEVs in the
external group.
PhyProc: Specifies that the tool should export statistics about MP/DRR.
PhyESW: Specifies that the tool should export statistics about access paths,
cache memory, and write pending rate.
PhyMPPK: Specifies that the tool should export statistics about MPPK.
PG: Specifies that the tool should export statistics about parity
groups.
Use the shortrange subcommand if you use this operand.
LDEV: Specifies that the tool should export statistics about logical
volumes.
LDEVEachOfCU: Specifies that the tool should export statistics about logical
Volumes each of CU.
Port: Specifies that the tool should export statistics about ports.
Use the shortrange subcommand if you use this operand.
PortWWN: Specifies that the tool should export statistics about host bus
adapters (WWNs) connected to ports.
Use the shortrange subcommand if you use this operand.
LU: Specifies that the tool should export statistics about LUs.
Use the shortrange subcommand if you use this operand.
PPCGWWN: Specifies that the tool should export statistics about host bus
adapters (WWNs) belonging to PPC groups.
Use the shortrange subcommand if you use this operand.
RemoteCopy:Specifies that the tool should export statistics about
the whole subsystem related to the remote copy function.
RCLU: Specifies that the tool should export statistics about LUs
related to the remote copy function.
RCLDEV: Specifies that the tool should export statistics about LDEVs
related to the remote copy function.
UniversalReplicator: Specifies that the tool should export statistics
about whole subsystem related to Universal Replicator.
URJNL: Specifies that the tool should export statistics about
journal groups related to Universal Replicator.
URLU: Specifies that the tool should export statistics about LUs
related to Universal Replicator.
URLDEV: Specifies that the tool should export statistics about LDEVs
related to Universal Replicator.



shortrange [[yyyyMMddhhmm][{+|-}hhmm]:[yyyyMMddhhmm][{+|-}hhmm]]
Specifies the range of statistics to be exported.
The specified range applies to statistics in the LDEV tab, the Port-LUN tab,
and the WWN tab.
yyyyMMddhhmm indicates a time.
+hhmm adds the specified hours and minutes to yyyyMMddhhmm.
-hhmm subtracts the specified hours and minutes from yyyyMMddhhmm.
If yyyyMMddhhmm is omitted, +hhmm adds the specified hours and minutes to the
monitoring start time, and -hhmm subtracts the specified hours and minutes
from the monitoring end time.
If the value on the left of the colon (:) is omitted, the monitoring start
time is assumed.
If the value on the right of the colon is omitted, the monitoring end time is
assumed.

longrange [[yyyyMMddhhmm][{+|-}ddhhmm]:[yyyyMMddhhmm][{+|-}ddhhmm]]
Specifies the range of statistics to be exported.
The specified range applies to statistics in the Physical tab.
yyyyMMddhhmm indicates a time.
+ddhhmm adds the specified days, hours and minutes to yyyyMMddhhmm.
-ddhhmm subtracts the specified days, hours and minutes from yyyyMMddhhmm.
If yyyyMMddhhmm is omitted, +ddhhmm adds the specified days, hours and minutes
to the monitoring start time, and -ddhhmm subtracts the specified days, hours
and minutes from the monitoring end time.
Ensure that mm is 00, 15, 30, or 45. If you do not specify mm in this way,
the value on the left of the colon (:) will be rounded up to one of the four
values. Also, the value on the right of the colon will be rounded down to
one of the four values.
If the value on the left of the colon (:) is omitted, the monitoring start
time is assumed.
If the value on the right of the colon is omitted, the monitoring end time
is assumed.

outpath path
Specifies the directory in which files will be saved.
If the specified directory does not exist, this subcommand creates the
directory.
If the operand is omitted, the current directory is assumed.

option [compress|nocompress] [ask|clear|noclear]
compress/nocompress: Specifies whether to compress or decompress CSV files.
If compress is specified, CSV files are compressed in ZIP format.
ask: Displays a message that asks whether to delete existing directories
and files.
clear: Deletes subdirectories and CSV files from the directory in which CSV
files should be saved, and then exports monitoring data.
noclear: Overwrites files and subdirectories in the directory in which CSV
files should be saved.

apply
Saves monitoring data in files.
If the group subcommand is not used, the apply subcommand does nothing.
When the apply subcommand finishes, the settings made by the group subcommand
will be reset.

set [switch={m|off}]
Starts or stops monitoring.
switch={m/off}:Turns the monitoring switch on/off.
When m (1<=m<=15) is specified, it turns the switch on every m minutes.
If nothing is specified, no action takes place.
Causes of the exit code are as follows.
1:Failed to change the mode to Modify mode
4:No write permission
Refer to the exit code as follows.
¥Windows[DOS batch] : %errorlevel%
¥UNIX[B shell] : %?
¥UNIX[C shell] : %status

help
Displays the on-line help.


logout
Export tool end

Outcomes