Can we attach directly the Switch Module VDX6747 (installed on a B500 blade systems) to a CISCO NEXUS Switch.
This will never be officially supported by HDS. Brocade and Cisco are in direct competition, so they want you to strip out any competitive networks and replace with their own. HDS needs an Interop from either Cisco or Brocade, so we’re almost asking the impossible!
Technically there shouldn’t be too many issues however, providing you don’t use any of the vendor specific protocols. In other words, stick to native and the switches should talk.
However, I’m not sure if anyone has tried this in practice. Is there anyone out there that has ???
Have you considered the pass-thru modules if this is not an option?
クリス . ジー
EMEA Unified Compute Platform Sales Specialist
Unified Compute Platform Solutions
HITACHI DATA SYSTEMS LIMITED
Wellington House, Starley Way, Bickenhill Lane, Solihull, West Midlands. B37 7HB
Desk : +44 1217 817220
Fax : +44 1217 817336
Mobile/Cell : +44 7841 999277
Hitachi Data Systems Limited, a company registered in England with registered office at Sefton Park, Stoke Poges, Buckinghamshire SL2 4HD (Registered Number: 02332239).
This message and any attachment are proprietary and may be privileged or otherwise protected from disclosure. If you are not the intended recipient, you are hereby notified that you have received this transmittal in error. In this case, any review, dissemination, distribution, or copying of this transmittal is strictly prohibited. If you have received this communication in error, please notify us immediately by reply e-mail and immediately delete this message and all its attachments.
Retrieving data ...