Profile

Hassaan Pasha

Mideast Data Systems

Contact Details

Mideast Data Systems

My Content

1 to 10 of 10 total
Posted By Hassaan Pasha 09-19-2023 08:50
Found In Egroup: Hitachi Ops Center​
\ view thread
You can monitor as many switches as you want. Each Switch will have its own individual Probe. I am not sure about licensing but you will need the Node license pack of 25.  ------------------------------ Hassaan Pasha Systems Engineer Mideast Data Systems ------------------------------
Posted By Hassaan Pasha 07-31-2023 04:32
Found In Egroup: Network Attached Storage​
\ view thread
What if virtual volume is not used? ------------------------------ Hassaan Pasha Systems Engineer Mideast Data Systems ------------------------------
Posted By Hassaan Pasha 07-31-2023 04:17
Found In Community: Network Attached Storage​
\ view thread
You can use Ops Center Analyzer for HNAS to get some performance details for EVS and Filesystem but not for virtual volumes.
Posted By Hassaan Pasha 05-13-2023 08:30
Found In Community: Hitachi Ops Center​
\ view thread
Hi,  Try to rescan the HBA or reboot the server. The OS will be able to scan the LDEVs assigned to it.
Posted By Hassaan Pasha 04-26-2023 08:49
Found In Egroup: Network Attached Storage​
\ view thread
I would recommend the following: 1. Delete all the shares/exports on the HNAS. 2. Delete all the Filesystems on the HNAS. 3. Delete all the Storage Pools on the HNAS. 4. Delete all the EVS in the HNAS 5. On HUS 150, unmap all the LUNS to the HNAS HG. 6. the SD will be greyed out. Delete all the SD on ...
Posted By Hassaan Pasha 08-27-2022 08:44
Found In Egroup: Object Storage​
\ view thread
Hi Peter, You can find all the Hitachi Visio Stencils on https://www.visiocafe.com/hitachi.htm ------------------------------ Hassaan Pasha Systems Engineer Mideast Data Systems ------------------------------
Posted By Hassaan Pasha 08-25-2022 06:59
Found In Library: Network Attached Storage​
Posted By Hassaan Pasha 08-25-2022 06:59
Found In Egroup: Network Attached Storage​
\ view thread
Hi, Audits are enabled on the Filesystems but when accessed on MMC it gives an error. How to open the evt file in MMC? ------------------------------ Hassaan Pasha Systems Engineer Mideast Data Systems ------------------------------
Posted By Hassaan Pasha 08-10-2022 15:52
Found In Egroup: Converged & Hyperconverged Infrastructure
\ view thread
Hi, It seems there is no direct upgrade method for UCP Advisor 3.10/11 to 4.X. What is the procedure for the migration? ------------------------------ Hassaan Pasha Systems Engineer Mideast Data Systems ------------------------------
Posted By Hassaan Pasha 08-04-2022 14:39
Found In Community: Converged & Hyperconverged Infrastructure
\ view thread
Hi Daniel, You need to delete all the raidgroup first in that disk shelf. Then make sure that the status of all the disks in that disk shelf is set to free. Then perform the procedure remove the disks and then perform the procedure to remove the disk shelf